Bumper BoardsIf you expect to see some heavy hitting robot on robot action this year, these bumper boards have a well developed bumper wood joint that will hold together through the impacts. The bumper boards are CNC routed Baltic Birch, 18 layer, super straight, 3 4" plywood. They have an interlocking pattern that allow for alternating screws and large wood glue surface area. Full bumper wood kits include Titebond II wood glue, and 24 #6 1 5 8" wood screws.

For use with 100BASE-TX 4 wire communication

15mm wide pulleys are needed or 4x for a 3 wheel drive train (order from WCP or VexPro)

The new Turret240 is a much better solution that teams should consider as a replacement

do not disassemble or discard improperly)

Sensor IC Datasheet

Outline drawing

The total ratio from motor to the turret output is approximately 462:1 giving a free speed of 243 degrees per second (775pro) or 272 degrees per second (Redline)

Gears not included

The assembly in the picture has many sets

Solidmodel - NEO550 Motor

2x1 frame and gussets in solidmodel for example only

but quantity 2